Specifications of Maxma Class D 8500 watt Mono Amplifier |
||||
| Power at 4 Ohm | 2400 watt Mono | |||
| Power at 2 Ohm | 4500 watt Mono | |||
| Power at 1 Ohm | 8500 watt Mono | |||
| Power at 1 Ohm at 16V | 9800 watt Mono | |||
| Power at 1 Ohm at 18V | 11,000 watt Mono | |||
| Linked power at 2 Ohm 18V | 22,000 watt Mono | |||
| Signal to Noise Ratio | Greater than 10 dB | |||
| Damping factor | Greater than 200 | |||
| Input sensitivity | 0.2V - 6V | |||
| Cross over | 24dB Oct/Slope | |||
| Subsonic filter | 10 Hz to 50 Hz | |||
| Variable Bass Boost | 0 to 9 dB @ 45 Hz | |||
| Variable Low pass Filter | 35 Hz to 250 Hz | |||
| Variable Phase Shift | 0 to 180 degree | |||
| Remote controller unit | ||||
| Two amplifier connection | Output Master / Input slave | |||
| 0 Guage Power terminals | ||||
| 3 Oz copper layer Printed Circuit Board | ||||
| Operatable voltage | 8.5 V to 18 V | |||
| Dimension | 880mm | |||